On a aluminum skinned trailer with 3/4" plywood sides, do the trim molding screws screw into the edge of the plywood sides? I'm not to that step yet, but I am looking ahead.
Thanks
Teardrops n Tiny Travel Trailersor t n ttt for short (tnttt.com) |
Attaching trim molding
2 posts
• Page 1 of 1
Attaching trim molding
by Home Away... » Wed Oct 13, 2010 9:45 am
-
Home Away... - Teardrop Inspector
- Posts: 10
- Joined: Sat Sep 18, 2010 10:40 am
- Location: Starkville MS
by madjack » Wed Oct 13, 2010 3:48 pm
...on mine, the screw wouldda been right on the edge of the ply...so, I glued an additional section of 3/4ply to the wall, the thickness of the spars, between each spar to help catch the screw...I also predrilled all the screw holes and shot a dab of sealant into each one..............
madjack
madjack
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
-
madjack - Site Admin
- Posts: 15128
- Images: 177
- Joined: Thu Dec 02, 2004 5:27 pm
- Location: Central Louisiana