frame...looking for ideas 2

[Chip]

well better late than never,,, what there is of it,,, mostely tires and axle,,, but light weight it is,,,,,



chipper

[critter]

hey all,
ok ive started on my frame again.i got 2x2 x1/8 tubing and welded it togther and now im building my toung.pics comming soon.i scraped the 1 1/2 angle iron idea after welding it up, it flexs way too much.the 2x2 tubing doesent flex at all.itll be a lot tougher.i have a lot of ideas just most of em arent good

[Feral XJ-SC]

hey all,
ok ive started on my frame again.i got 2x2 x1/8 tubing and welded it togther and now im building my toung.pics comming soon.i scraped the 1 1/2 angle iron idea after welding it up, it flexs way too much.the 2x2 tubing doesent flex at all.itll be a lot tougher.i have a lot of ideas just most of em arent good

Maybe so, but now the rest of us have an idea about what won't work and why.

Good luck!

[Gaston]

frame for a 5+' by 10' tear. rails are 2x2x1/8 and 2x2x3/16 (Inset at the wheels) front and rear Xmembers are 2x2x1/8 inners are 2x1/8" angle. the tounge is 2x3x3/16.
Quality axle 2000lb torsion axle and 15x6 american eagle mags. Complete as shown it weights 300lbs , 42lbs of that is at the hitch and 129lbs at each wheel