The Fine Art of Salvage...

Anything to do with mechanical, construction etc

Re: The Fine Art of Salvage...

Postby Photoman33770 » Sun Jul 15, 2012 1:49 pm

Sorry to say most garage sales in my area are a waste of time as everything is way to high. People are wanting close to full price for well used stuff. The cheaper stuff is falling apart. But it does kill a weekend.
I did look and GASP there is a habitat store 20 miles from me ! gonna have to go check it out after my haircut tomorrow !
My sister in law does the goodwill etc stores every few days. So I may just give her a list of things to watch for and call me.
Photoman33770
Teardrop Builder
 
Posts: 42
Images: 9
Joined: Sun Jul 15, 2012 3:36 am

Re: The Fine Art of Salvage...

Postby bobhenry » Mon Jul 16, 2012 10:09 am

Well I was on my way home Friday and tripped over a yard sale and stopped.

As I am building the caboose to live in a couple of old lanterns caught my eye. I asked the gal "how much for thr lanterns" she replied "two dollars" I asked "is that for each or for both?
Her reply was "I don't care !" I gave her two dollars each anyway.

Dietz lil wizzards the brown one has the red signal glass globe in it :thumbsup:

Image

Image
Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10368
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN

Re: The Fine Art of Salvage...

Postby bobhenry » Mon Sep 17, 2012 6:42 am

Friday after work I had a few extra bucks in my pocket and a yard sale was calling my name.

I am sorry I didn't think to get a picture but stole this one off of the net.

Image

Yep a sweet sounding Sony am fm cd player for $15.00

It mounts under the cabinets taking up little if any room. It will be a great addition to the caboose.
Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10368
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN
Top

Re: The Fine Art of Salvage...

Postby eaglesdare » Mon Sep 17, 2012 7:36 am

:thumbsup: :wine:
Louella
May the foam be with you.
User avatar
eaglesdare
Donating Member
 
Posts: 3168
Images: 13
Joined: Tue Aug 26, 2008 7:06 pm
Top

Re: The Fine Art of Salvage...

Postby GPW » Mon Sep 17, 2012 9:30 am

BH, you’re getting all the Good deals !!! :thumbsup: 8)
There’s no place like Foam !
User avatar
GPW
Gold Donating Member
 
Posts: 14920
Images: 546
Joined: Thu Feb 09, 2006 7:58 pm
Location: New Orleans
Top

Re: The Fine Art of Salvage...

Postby bobhenry » Mon Sep 17, 2012 10:09 am

GPW wrote:BH, you’re getting all the Good deals !!! :thumbsup: 8)


You don't know the 1/2 of it........

My buddy Bubba called late saturday night and gave me a list of goodies he was givin' away out of a popup he was gutting to make a motorcycle hauler trailer.

In the list was the 50 foot #8 Gage S.O. cord that I need for the caboose. The top lifting mechanism may be a sorce of parts for the in cupalo storage bed. A 3 burner cooktop, furnace, converter with battery maintainer,cabinets, and other items I have forgotten. I figure the items I don't need I can share with the other members that I camp with for their builds and remodels.

I love free ! :lol:
Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10368
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN
Top

Re: The Fine Art of Salvage...

Postby bobhenry » Mon Oct 08, 2012 7:32 am

Saturday was busy shopping and such but I just couldn't resist a few yard sale signs and I tripped over 350 feet of extention cords. A couple were 10gage heavy duty ones. Here is the 12 volt wiring for the caboose build :D

Oh by the way total cost $4.00 and they threw in the crate :lol:

Image

Oh and here are some pics of my free popup salvage furnace and the bed lifting sidewinder winch.

Image
Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10368
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN
Top

Re: The Fine Art of Salvage...

Postby KCStudly » Tue Oct 09, 2012 2:52 pm

Score! :thumbsup:
KC
My Build: The Poet Creek Express Hybrid Foamie

Poet Creek Or Bust
Engineering the TLAR way - "That Looks About Right"
TnTTT ORIGINAL 200A LANTERN CLUB = "The 200A Gang"
Green Lantern Corpsmen
User avatar
KCStudly
Donating Member
 
Posts: 9640
Images: 8169
Joined: Mon Feb 06, 2012 10:18 pm
Location: Southeastern CT, USA
Top

Re: The Fine Art of Salvage...

Postby Wimperdink » Tue Oct 09, 2012 3:41 pm

30lb propane tank, thrift store pot, metal cabinet nob, and 2.5" exhaust pipe. Total cost under $20. My next will be an over under like the old 55 gallon drum style but using 20 or 30 lb tanks.

Image
Image You know a man is on the level if his bubble is in the middle.
User avatar
Wimperdink
1000 Club
1000 Club
 
Posts: 1058
Images: 33
Joined: Mon Sep 17, 2007 8:29 pm
Location: East TN
Top

Re: The Fine Art of Salvage...

Postby MikeyLikesIt » Wed Oct 10, 2012 8:29 pm

Bob,

I need to follow you around for a week.... My "treasure" hunting skills are horrible.
User avatar
MikeyLikesIt
Teardrop Master
 
Posts: 105
Images: 45
Joined: Tue Jan 17, 2012 11:50 am
Location: Indianapolis, Indiana
Top

Re: The Fine Art of Salvage...

Postby Wimperdink » Thu Oct 11, 2012 10:37 pm

For now its done, until I decide to put a chimney in the garage.

Image
Image You know a man is on the level if his bubble is in the middle.
User avatar
Wimperdink
1000 Club
1000 Club
 
Posts: 1058
Images: 33
Joined: Mon Sep 17, 2007 8:29 pm
Location: East TN
Top

Re: The Fine Art of Salvage...

Postby bobhenry » Fri Oct 12, 2012 5:57 am

nice little stove

Right after my first divorce I went and lived with a buddy in a big old rambling farm house. We where both scratching for a living and heating that monster was expensive. Luckily I was working in Industrial maintainance and had assess to all kinds of plumbing junk and welders and power hacksaws and loads and loads of other toys so I made " Miss Piggy".

Image

I dragged in a 15 ?? and a 20?? gallon water heater and added 2" pipe feet and a 2 1/2 coupling for her nose ( dampered intake air ) and in her back inserted two 4" pipes for heat tubes to the second stage combustion chamber then out the stack. This thing was truely remarkable 2 minutes after ligthing the fire the top tank was hot hot hot and the fire tank was still hugable. The off gasses were being driven off in the fire chamber and thanks to some poor welds, a few intake leaks at the 4" tubes added oxygen where shown and the gasses were now yellow and blue as your gas stove flame. With a stack damper and a nose intake damper the stove was very controlable and could be shut down almost at will. So in short don't dismiss a secondary air intake in the stack gasses this will make a really clean burning and very effecient heat stove. :thumbsup:
Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10368
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN
Top

Re: The Fine Art of Salvage...

Postby Wimperdink » Fri Oct 12, 2012 10:28 am

I was planning one of these for build two. I wanted a cooking surface on this one, the next one should have the extra barrel for radiating heat. I can see the value of more oxygen for burning the exhaust gasses. I was going to use two 20 lb tanks for that one. I only have a 1 car garage to heat.
Image You know a man is on the level if his bubble is in the middle.
User avatar
Wimperdink
1000 Club
1000 Club
 
Posts: 1058
Images: 33
Joined: Mon Sep 17, 2007 8:29 pm
Location: East TN
Top

Re: The Fine Art of Salvage...

Postby Wobbly Wheels » Sun Oct 21, 2012 3:33 pm

Hit a few garage sales yesterday but, as usual, most people overpriced their junk...
On Friday, though, I had a 15" Lodge cast iron skillet with lid given to me. I was helping a guy clean out his garage and it was in there. It had never been used, never been seasoned.
The little bit of surface rust came off with some oil, some steel wool, and some elbow grease. Then I cleaned it, oiled it, and seasoned it. This is the 'after' picture...after I made breakfast in it:
Image

Among other things, I think it will make a great pizza/cornbread oven for the campfire...
The lid is flat enough that I should be able to load it up with coals, even though it doesn't have the lip that DO lids have for that.
Man, I'm looking forward to the first batch of bannock to come out of it !
User avatar
Wobbly Wheels
Donating Member
 
Posts: 1080
Joined: Tue Mar 15, 2011 9:51 am
Top

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 4 guests