12V Lighting

Anything to do with mechanical, construction etc

12V Lighting

Postby Bandit » Wed Feb 22, 2006 5:47 pm

I was just at Lowe's and was looking at there low voltage halogen lighting. Some are puck style and others are adjustable fixture style. But as I looked at these, I noticed that they were 12V and from 10 to 50 Watts. These lights are powered by a transformer that transforms 110V AC to 12V DC. If you chucked the transformer and wired into the 12V system, would these not make good interior lighting. Also, is there a way to maintain the transformer for shore power and wire also for 12V power?
I guess this would not be necessary with the battery and the converter from BestConverters.com.
I just think that these fixtures have a better quality look about them as oppose to the RV quality lighting that has been available.
You would think with all the boom in RV sales lots that you see when you travel, that the quality and options for these type items would allow for more selection.
Thanks,!
:thinking: :thinking: :thinking: :thinking: :thinking:
First Metal Cut 02/11/06
Complete! (Almost) 08/22/06
Looking for a trip in the SPRING!!!!
Not Up to Testing the Heater!!!
Thanks for all the HELP!!!!
User avatar
Bandit
Donating Member
 
Posts: 207
Joined: Tue Dec 06, 2005 12:25 pm
Location: McMinnville, TN

Postby mikeschn » Wed Feb 22, 2006 5:50 pm

Bandit,

I looked at that too initially... I ditched the halogen spot lights because they were getting too hot.

I ended up going with these lights from sailor sams...

http://www.mikenchell.com/Baja_Benroy_P ... pic135.jpg

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI

Postby Sonetpro » Wed Feb 22, 2006 7:53 pm

mikeschn wrote:Bandit,

I looked at that too initially... I ditched the halogen spot lights because they were getting too hot.

I ended up going with these lights from sailor sams...

http://www.mikenchell.com/Baja_Benroy_P ... pic135.jpg

Mike...

Bandit, I also didn't like the quality of RV light's. Look at some marine ones. They are of alot better quality and there are some nice ones, usually made of stainless, aluminun, or brass. My cabin lights are boat SS cabin light's with glass dome. the reading lights are boat SS map light's, my porch light's are SS stern light's and my skylight is a sailboat deck prism. All very good quality.
}><)))'> ~--------------·´¯) SteveT
You don't know what the limit's are until you take it there.ImageImageImage
User avatar
Sonetpro
Site Admin
 
Posts: 2038
Images: 107
Joined: Sun Oct 30, 2005 8:11 am
Location: Plantersville, TX
Top

Postby TomS » Wed Feb 22, 2006 7:55 pm

Flourescents are very efficient if you want to get the maximum use out of your batteries. Check out he RV parts dealers and RV parts web sites..
Tom Swenson
[email protected]
User avatar
TomS
1000 Club
1000 Club
 
Posts: 1367
Joined: Thu Nov 18, 2004 2:06 pm
Location: Fitchburg, MA
Top

Postby Bandit » Wed Feb 22, 2006 9:18 pm

Mike, Sonetpro,
Were did you find the lights you are talking about?
:thinking:
First Metal Cut 02/11/06
Complete! (Almost) 08/22/06
Looking for a trip in the SPRING!!!!
Not Up to Testing the Heater!!!
Thanks for all the HELP!!!!
User avatar
Bandit
Donating Member
 
Posts: 207
Joined: Tue Dec 06, 2005 12:25 pm
Location: McMinnville, TN
Top

Postby Sonetpro » Wed Feb 22, 2006 10:05 pm

Bandit wrote:Mike, Sonetpro,
Were did you find the lights you are talking about?
:thinking:

I find alot of them on ebay. I also shop boat supply sites. some are pricey so shop around. But if compared to a RV light, pay $5 it'll look like a $5 light the nicer ones cost a little more but look 10 times better.
}><)))'> ~--------------·´¯) SteveT
You don't know what the limit's are until you take it there.ImageImageImage
User avatar
Sonetpro
Site Admin
 
Posts: 2038
Images: 107
Joined: Sun Oct 30, 2005 8:11 am
Location: Plantersville, TX
Top

Postby Ken A Hood » Wed Feb 22, 2006 10:12 pm

Ebay is where i do my shopping; I bought some like THESE The one's I got have 2 settings, a regular light, and a red night-light.
Disclaimer: I in no way resemble the avatar shown. Furthermore, I in no way have any affiliation to the Trailer Park Boys and more specifically Bubbles!
User avatar
Ken A Hood
500 Club
 
Posts: 841
Images: 42
Joined: Sun Apr 18, 2004 8:15 pm
Location: ON CANADA
Top

Postby Sonetpro » Wed Feb 22, 2006 10:20 pm

Ken those are nice ones. The same as I have :lol: I love ebay
}><)))'> ~--------------·´¯) SteveT
You don't know what the limit's are until you take it there.ImageImageImage
User avatar
Sonetpro
Site Admin
 
Posts: 2038
Images: 107
Joined: Sun Oct 30, 2005 8:11 am
Location: Plantersville, TX
Top

Postby Leon » Thu Feb 23, 2006 2:59 am

If you want your battery to last, put LED replacement bulbs in your standard fixture and the current drops dramatically
User avatar
Leon
Silver Donating Member
 
Posts: 559
Images: 21
Joined: Mon Oct 24, 2005 12:23 am
Location: So Cal (Ridgecrest)
Top

Postby Jim Marshall » Thu Feb 23, 2006 9:07 am

Judy and I are looking for lighting now but we are going with 110 instead of 12 V. We just want low profile ceiling lights but so far not much luck finding what we want.
I started out with nothing and I still got plenty left.

VOL-N-TEAR
User avatar
Jim Marshall
The 300 Club
 
Posts: 343
Images: 63
Joined: Wed Sep 28, 2005 12:31 pm
Location: Chattanooga, Tennessee
Top

Postby Boodro » Thu Feb 23, 2006 2:01 pm

Jim , how some small sconses? They usually go on the wall , can you mount & wire them there? just a thought .
We are all travelers in this world , from the sweet grass to the packin house , birth till death , we travel between the eternities . ( Robert Duvall as Prentiss Ritter)
User avatar
Boodro
1000 Club
1000 Club
 
Posts: 1052
Images: 101
Joined: Sun Oct 10, 2004 9:35 pm
Location: Sylvania, Ohio
Top

Postby TRAIL-OF-TEARS » Thu Feb 23, 2006 3:34 pm

Bandit.
That is exactly what I did, I used the lowes lights and chucked the xfrmrs. I have a puck type light in the galley and two stainless goose-neck lights with a built in switch that I mounted on the wall in the cabin. plenty of light just don't touch. here is a pic of the galley light.

Image

Mike I too was concerned about heat at first then I thought about the lights in my house under my kitchen cabinets. My tear is build out of far better materials than those crappy things so I don't worry too much about that.
Steve J.

Image
Home built Camp-Inn clone.
GO SPURS GO
User avatar
TRAIL-OF-TEARS
Donating Member
 
Posts: 854
Images: 41
Joined: Tue Sep 21, 2004 11:09 am
Location: Spring Branch, Texas (north of San Antonio)
Top

Postby mikeschn » Thu Feb 23, 2006 3:48 pm

TRAIL-OF-TEARS wrote:
Mike I too was concerned about heat at first then I thought about the lights in my house under my kitchen cabinets. My tear is build out of far better materials than those crappy things so I don't worry too much about that.


Well, I suppose as long as you don't go to sleep with your lights on, you don't have to worry about this...

Image

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby critter » Thu Feb 23, 2006 4:53 pm

woah,
im not gonna ask! :shock:
critter

salad anit food... its what food eats!




critter
User avatar
critter
500 Club
 
Posts: 565
Images: 54
Joined: Fri Nov 04, 2005 2:39 pm
Location: greensboro nc
Top

Postby Jim Marshall » Thu Feb 23, 2006 4:56 pm

Boodro, I already have our wires stubbed out in the ceiling. At first we thought about sconces but we changed our minds. I appreciate your suggestion buddy. :)

Good gravy Mike, you sure have a way about getting your point across and believe me it is well taken. :shock: Now I'm skeered.
I started out with nothing and I still got plenty left.

VOL-N-TEAR
User avatar
Jim Marshall
The 300 Club
 
Posts: 343
Images: 63
Joined: Wed Sep 28, 2005 12:31 pm
Location: Chattanooga, Tennessee
Top

Next

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 3 guests