Ira wrote:I mostly used the Elmer's brand of it with the bull on the bottle (the chemical formula is like identical), and THAT stuff was nuts to work with.
I'm gonna have to buy some more of that or the GG for my fenders, and I want to be real careful about the foaming. So I won't wet it this time. Maybe I was also using too much water--I rubbed it on heavy with a paper towel.
I had thought that the less viscous Elmers Ultimate brand foamed the most, but someone else said it was GG. Glad that you're experience backs that up. I've actually used the extra foaming of Elmers brand on several occations. Heavy mist on one side, clamp, and wait.
South Florida shouldn't have problem with too low of humidity to not wet the surfaces. Get the Gorilla brand, but even that is going to foam. Quick tip... get painters tape, and put that on the surfaces you don't want glued. You can pull it off, and the surface stays clean. Even if you have to scrape a bit of the foam bead off of the back of the tape, you're left with a pristine surface.