![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Tue Jun 06, 2006 11:51 pm
by Nitetimes
Micro469 wrote: It will be glued and screwed to the side of the floor. Can I also screw it to the side of the trailer frame, or will that cause a problem if the trailer bends and twists when driving on uneven roads or pathways? I don't want it to crack or break the outside wall.
![Rolling Eyes :roll:](./images/smilies/econ_rollingeyes.gif)
No problem at all, once your box is bolted to the trailer the bending and twisting pretty much ends.
![Thumbs Up :thumbsup:](./images/smilies/econ_thumbsup.gif)
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Jun 07, 2006 8:05 pm
by kayakrguy
Thanks for the info re getting 1" angle--Kerry, Madjack. Next question--I know their is a drill bit for drilling holes in metal that leave a beveled hole in the metal so that the screw is recessed--what is that called? Wanna make just one trip to Home Despot!
Jim
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Jun 07, 2006 8:20 pm
by Ken A Hood
I think it's a "unibit" your looking for......if not disregard my post....
![Image](http://images.channeladvisor.com/Sell/SSProfiles/10060130/Images/10193a_main1_360.jpg)
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Posted:
Wed Jun 07, 2006 8:49 pm
by asianflava
Uni-bits, Chrismas Tree bits, or whatever they are called are great for drilling metal. I've found that they do leave a burr on the backside though. Not a big deal, I just hit it with a counter sink or a large size drill bit and it comes right off.