Page 1 of 1
asphalt emulsion
Posted:
Wed Jul 19, 2006 3:08 pmby Elumia
This has been covered in many posts, but.... The posts seem to only specify a brand. Henry is what is available locally and they have a bunch of differnt products.
http://www.henry.com/Protective_Roof_Coatings.20.0.html
I purchased Henry 107, and before I apply, I wanted to makes sure this is what others had used and what their experience has been.
Thanks,
Mark
Posted:
Wed Jul 19, 2006 3:39 pmby asianflava
I used Gardner's asphalt. I used Henry's adhesive to glue the aluminum down though.
Posted:
Wed Jul 19, 2006 4:12 pmby madjack
107 should do ya just fine...............................................
Posted:
Wed Jul 19, 2006 4:35 pmby mikeschn
madjack wrote:107 should do ya just fine...............................................
I agree!
Mike...
Posted:
Wed Jul 19, 2006 6:53 pmby Mightydog
Give it plenty of time to dry/cure. It's impressive stuff in a prehistoric kind of way....
Posted:
Wed Jul 19, 2006 6:56 pmby Elumia
Just checking - When I was reading the instructions (I know as guys we're just supposed to plunge ahead) I didn't read much about applying to wood and it is not a solvent based material.
it's one of those things that are kinda hard to "undo"!
Thanks for the vote of confidence.
Mark
Posted:
Wed Jul 19, 2006 8:59 pmby Miriam C.
I used Gardners but because it was near when I was ready (remembered) to buy.
I didn't let mine cure completely and it stuck solid to the frame. Only a jack or some big ol girls are gonna get it up. I decided it might be a good thing.
Miriam