Page 1 of 1
Nifty tool for installing household door knobs.....
Posted:
Thu Sep 07, 2006 7:11 pmby b.bodemer
On my 100th trip(at least it feels that way) to HD I noticed a cool tool for help installing a door knob.
Bill totally loved this tool as it screwed into place, bits were included and it made easy work of cutting the two holes needed.
Check it out:
Barb
Posted:
Thu Sep 07, 2006 7:21 pmby Mightydog
Only 100 trips to HD? We're well known in the Tool Corral .
It's fun to find cool things like that!
Posted:
Thu Sep 07, 2006 7:29 pmby mikeschn
That is one very cool tool. I could have used that on my 1 1/4" doors to keep the 1 1/8" bit centered. (Does it do 1 1/4" doors?)
Mike...
Posted:
Thu Sep 07, 2006 8:06 pmby b.bodemer
Mike,
It does 1 1/4 - 1 3/4 inch doors. Then it lets you adjust for either 2 3/8th or 2 3/4" backsets.
Barb
Posted:
Thu Sep 07, 2006 8:06 pmby mikeschn
b.bodemer wrote:Mike,
It does 1 1/4 - 1 3/4 inch doors. Then it lets you adjust for either 2 3/8th or 2 3/4" backsets.
Barb
Awsome! Thanks...
Mike...
Posted:
Thu Sep 07, 2006 8:23 pmby mikeschn
And you're so close... I can't believe all these years and I've never popped up to Lakewood from Strongsville. I'll have to swing by one of these days!
Mike...
Posted:
Fri Sep 08, 2006 5:17 pmby Spadinator
SWEET TOOL! I may have to go look for one of those!!
Posted:
Fri Sep 08, 2006 10:56 pmby Boodro
Hey Barb , I am going to Rocky river this Sat. how far is it from you ?? I'll be going there for a volleyball tourn. Maybe I cloud make some time to swing by , I'd love to see your build! I hope your on line now!!