Wheel wells
Posted: Tue Nov 21, 2006 5:58 amI just realized that I need to get two wheel wells. Does anyone know where to purchase these for use in a camper?
Happy Trails
Len
Page 1 of 1
Posted: Tue Nov 21, 2006 5:58 amPosted: Tue Nov 21, 2006 6:28 amI made mine. Wasn't very hard. I bent the metal in a door frame.
Happy Trails
Len
Happy Trails
Len
Posted: Tue Nov 21, 2006 6:48 amI built mine out of wood, not hard at all. You can do it! 
Posted: Tue Nov 21, 2006 10:47 amThanks, guys. That helps. I'll try using some wood. I'm far more intimidated by the metal.
Posted: Tue Nov 21, 2006 11:32 amHudsonite wrote:Thanks, guys. That helps. I'll try using some wood. I'm far more intimidated by the metal.
Just make sure to seal them *very* well. If it's raining and you're travelling that's where all the water is going to go.
Posted: Tue Nov 21, 2006 2:18 pmI made them from 1/8" luan, formed over a barrel end, then glassed on the outside, removed from the barrel and glassed the inside, trimmed to fit and glassed in
[/url]
a good project to learn how to work with fiberglass
a good project to learn how to work with fiberglass
Posted: Tue Nov 21, 2006 2:34 pmGaston wrote:I made them from 1/8" luan, formed over a barrel end, then glassed on the outside, removed from the barrel and glassed the inside, trimmed to fit and glassed in
a good project to learn how to work with fiberglass
Gaston I liked the way you did your wheel wells, very nice work.
Posted: Wed Nov 22, 2006 5:47 amWow! Those are simply outstanding. Thanks so much for the tip.
Posted: Wed Nov 22, 2006 3:23 pmSHOWOFF!! 
Really Gaston , That's one really nice tear. I love it!!
Really Gaston , That's one really nice tear. I love it!!