Teardrops n Tiny Travel Trailers

Does anyone of our teardrop suppliers sell the Old Ford Wheels? With the spokes? Such as Martha and a few others have?

Classic Finn

Finn,

Check out Ebay: Ford wire wheel link

Classic Finn wrote:Does anyone of our teardrop suppliers sell the Old Ford Wheels? With the spokes? Such as Martha and a few others have?

Classic Finn

Coker Tire... Brand new with hubcaps:

http://www.coker.com/store/customer/pro ... 330&page=1

Ohhhh myyyyyyyy ...Aint they Shewwwweet... Boy would I like Santa to make another trip over...


http://cgi.ebay.com/ebaymotors/Cadillac ... enameZWDVW but for ....US $2,095.00 Buy Now... Geeeee Gad... Nooooooo way....


These are nice ones.... I got fever now... I feel the temeperature rising..but its going down due to the "Small Price"

Classic Finn

Podunkfla wrote:

Classic Finn wrote:Does anyone of our teardrop suppliers sell the Old Ford Wheels? With the spokes? Such as Martha and a few others have?

Classic Finn

Coker Tire... Brand new with hubcaps:

http://www.coker.com/store/customer/pro ... 330&page=1

Ohhh myyyyyyy and a set of them Oldie Ford Wheels...Hmmm Anyone coming over to Finland or Sweden in the near future?

Classic Finn

toypusher wrote:Finn,

Check out Ebay: Ford wire wheel link

By the Way.... Kerry and Brick thanks for the fever....
Ok I asked for it... but not this bad... ouch...

Classic Finn

PS - Martha see what you started....

Classic Finn wrote:

Podunkfla wrote:

Classic Finn wrote:Does anyone of our teardrop suppliers sell the Old Ford Wheels? With the spokes? Such as Martha and a few others have?

Classic Finn

Coker Tire... Brand new with hubcaps:

http://www.coker.com/store/customer/pro ... 330&page=1

Ohhh myyyyyyy and a set of them Oldie Ford Wheels...Hmmm Anyone coming over to Finland or Sweden in the near future?

Classic Finn

Heikki... Did ya see the cool MG/Austin Healy wheels I got off ebay for a hundred bucks? Just gotta paint 'em...

Podunkfla wrote:

Classic Finn wrote:

Podunkfla wrote:

Classic Finn wrote:Does anyone of our teardrop suppliers sell the Old Ford Wheels? With the spokes? Such as Martha and a few others have?

Classic Finn

Coker Tire... Brand new with hubcaps:

http://www.coker.com/store/customer/pro ... 330&page=1

Ohhh myyyyyyy and a set of them Oldie Ford Wheels...Hmmm Anyone coming over to Finland or Sweden in the near future?

Classic Finn

Heikki... Did ya see the cool MG/Austin Healy wheels I got off ebay for a hundred bucks? Just gotta paint 'em...

Ohhh Myyyyy I do now... So are ya sending them over after they are all cleaned up?

have you started building already Brick? They will look great on the tear...

Heikki

Ok even though this is silly

Im goin to ask... If them Förd fenders are 9 inches or are they ? What size tires would fill them out nicely ... Rather than leaving a lot of empty space inside of them...Id definitley go the oldie rims too.. Coker or Used if found... And would the WIDE whitewalls by Coker look good or no?

I did all right on the Voyager tires I think... so have to double check on this ... Im not real good with the wheel and tire sizes...

Classic Finn...

Actually as of last Oct. R.W. Johnson still had some old Ford wheels like mine and he was selling them for I think $50 each. We found that out when we were picking up the fenders from him at his home. If you were serious you would have to call or write to him about what he has and price. What shape they are in I don't know. The tire that wheel takes is a 600 - 16 and is 7 inches wide (measuring the tires we have now) and they take a tube. As you can see they are narrower than the modern tire. I put all the fender information over in my profile thread.

Our plan is to get white wall tires, with black fenders and red spokes.

Wheels something like these:

http://www.coker.com/store/customer/pro ... at=&page=1

Martha

martha24 wrote:Actually as of last Oct. R.W. Johnson still had some old Ford wheels like mine and he was selling them for I think $50 each. We found that out when we were picking up the fenders from him at his home. If you were serious you would have to call or write to him about what he has and price. What shape they are in I don't know. The tire that wheel takes is a 600 - 16 and is 7 inches wide (measuring the tires we have now) and they take a tube. As you can see they are narrower than the modern tire. I put all the fender information over in my profile thread.

Our plan is to get white wall tires, with black fenders and red spokes.

Wheels something like these:

http://www.coker.com/store/customer/pro ... at=&page=1

Martha

Martha that is going to be sweet.. Im just going loony over this topic.. and Im sooooooo far away from you folks...

But ok I have a family friend here who is the Dealer for Coker and thats who I purchased the set of tires, and rims from for mine...

The fenders are just not available here ... the rims and tires can be a little easier...

Im not in a hurry just yet till I get the Voyager done.. and hopefully that wont be too far away anymore...

Best regards
Classic Finn

Finn

I still have (5) 17" wheels from a '34 ford I haven't unloaded yet. A while back I offered them for $200 + shipping. That offer is still good but I'd like to get rid of them all. Maybe someone else on this forum is interested in taking 2 or 3. These wheels are in good shape with some minor surface rust. I'll try to get some pictures up next week.

Regards, Bob "O"

Bob,
do you know what the bolt pattern is on the wheels. I might be interested if someone wants to split them with me.

Scott F.

Scott

The bolt pattern is 5 on 5 1/2" bolt circle

Regards, Bob "O"

Thanks Bob, I'll need to fiind out how much it would cost to swap the hubs on my axle. they are currently 5-41/2.

Scott F.