Page 1 of 1

Fiberglass siding - Questions

PostPosted: Tue Apr 03, 2007 1:01 pm
by Dave H
I am looking into recovering my trailer with the fiberglass siding you see on all these new RVs. Although I am having trouble finding all the outside trim parts I want.

http://www.rvsurplussalvage.com/catalog ... ct_id=1879


I am sure there is a thread here that could answer all my questions. Can somebody point the way?

- Dave

Got some used siding on the way - maybe

PostPosted: Wed Apr 04, 2007 4:29 pm
by Dave H
I found someone who says he will pull off the correct sized sheets from a wrecked motorhome. He hasn't said if they will have graphics or not... Little worried that I will get half a word or half of a fox head or something... Anyway, still nobody to talk fiberglass reinforced plastic siding with? I thought you guys knew everything..

:SH

Trim Moldings

PostPosted: Wed Apr 04, 2007 4:33 pm
by Dave H
I found this web site - it has moldings I think will work but I do not know which ones I need...

Not sure if I should go with the M63 Corner Cap or the M60 Regular Edge or a combo of both...

http://www.all-rite.com/

PostPosted: Wed Apr 04, 2007 7:24 pm
by len19070
http://www.all-rite.com/

This site is a good spot to look for what you want. But your best bet is to find out what you want. Then buy it from your local RV dealer. I buy this stuff all the time and unless you buy Miles of it, the shipping will kill ya.

I get 20, 16' legnths delivered for about $27-28 each.

You should pay about $40-$50 for a 16' length at an RV dealer.

Shipping!

Happy Trails

Len

PostPosted: Wed Apr 04, 2007 11:45 pm
by jdarkoregon
Dave,

Jump on I-5 then I-205 and you can get the siding (NEW) and the molding

http://www.interstatemetals.com/

John