Page 1 of 1

How big is your door?

PostPosted: Fri Apr 06, 2007 2:57 pm
by benzu
I'm 6'3'' and my wife is 6'0'' and was wonding what size of door would be a good size. Currently I have a 40''h x 30''w I did a paper pattern of it and hung it on the wall, but I still don't know if it's too big.

Help please

Mike

PostPosted: Fri Apr 06, 2007 3:03 pm
by elmo
I am 6'5" 280lbs(give or take) and my door is 30"wide x 36" high. I have no problem getting in and out.

How high are you walls?

PostPosted: Fri Apr 06, 2007 3:05 pm
by benzu
5 feet. I'm building a 5'h x 10'l x 5'w

mike

PostPosted: Fri Apr 06, 2007 3:05 pm
by Gerdo
Mine are 30x36.

PostPosted: Fri Apr 06, 2007 3:12 pm
by elmo
benzu wrote:5 feet. I'm building a 5'h x 10'l x 5'w

mike


With the 5' walls it would be fine IMHO. :thumbsup:

PostPosted: Fri Apr 06, 2007 4:10 pm
by Miriam C.
I would make my doors high enough to jump up and down in. 8) Not really but if you sit on a chair and have someone measure to your head and add a couple of inches it should work. Remember when you come out of the door you will either raise up or duck. Mike ducks (6'1") I am the one who hits her head.

PostPosted: Fri Apr 06, 2007 7:32 pm
by bledsoe3
On a 5' high tear, 40" should be fine. Mine are 30" X 36".

PostPosted: Fri Apr 06, 2007 10:53 pm
by doug hodder
Mike...I'm 6'2" 240# and have 28 x 33 doors...they are fine for me. You are taking the right approach however in making a paper one and putting it up against the side of the tear...My opinion, but I think it's important to make it all "look" good and that things are in proportion in relation to the front of the tear, fenders roof and bottom...Doug

PostPosted: Sat Apr 07, 2007 10:49 am
by Tripmaker
I have a 5x10 under construction and my doors are 36" x 36". Checkout my album to see how they look.

PostPosted: Sun Apr 08, 2007 9:11 am
by Scooter
Mine are 26 wide, 36 tall.
4x8 teardrop.
I'm 5ft9, 160.
Curved door takes a bit away from dimensions but they're still more than ample for me.