Teardrops n Tiny Travel Trailers

The hatch is skinned - Is this where the hinge step comes in or what is the next procedure... wife has the camera on a lil trip so cant have photos till she gets home....UGH...

Are mouldings needed at any point on the hatch at this moment or no? Top or bottom?

By the way, what is the best way of getting off the excess glue, no matter how little was used still some tended to come out...

Classic Finn

Heikki,
What type glue?

Classic Finn,

You expect us to believe you with out pictures

Sierrajack wrote:Heikki,
What type glue?

Its a product called Sika Bond 545 - Poly Urethane Base... Not much has sqeezed thru but enough to see.. Im Finnicky After spreading it out on the surface you have to spray water lightly to it...then clamp for 40 minutes and its tight ...


Darn glue is strong stuff...I guess only thing to do is sander off...

Classic Finn

rbeemer wrote:Classic Finn,

You expect us to believe you with out pictures

Yupper yur yust going to have to now.... Good thing wife is gone... The Hatch is in my living room ... clamped down and drying..
She called and said they will be home tomorrow..
Wheeeeeeeeeeew... Good Thang!!! Living room looks like a woodshop ..lol: but it aint the 1st time...Too cold to dry outside..I have a web cam if ya want proof...

Woikin on it all of yesterday an today...

Classic Finn

Heikki you can get the glue off using a sharp chisel or razor. Careful not to cut deep.

Miriam C. wrote:Heikki you can get the glue off using a sharp chisel or razor. Careful not to cut deep.

I could of used acetone while it was still moist but noooooo moore...

I,ll give it a try Miriam... Tack så mycket..eller tack vänlig..

Classic Finn

I want proof! So, where's da webcam? Better not be any of those pictures of you and the missus while the kids are gone.