Teardrops n Tiny Travel Trailers

I'm getting ready to put the aluminum on my hatch. My plans are pretty vague. At the bottom of the hatch, how far past the bottom of the floor should I go with the aluminum? Or should I be flush with the bottom of the floor? Thanks for your help.

Darrel

Darrel,
I have done and I have seen where the bottom of the hatch ends at the base of the floor - where just the frame shows. In other words, you will be overlapping the floor and that way you can seal the hatch edge on the bottom. I think the Generic Benroy plans has a good drawing for that.

Thanks Jack, for your help. I checked out your album. It looks like it won't be long before you're going camping. It looks good.

Thanks,
Darrel