Day of Fender Positioning and Window Work

Well I got to the point of Fender Postioning and Window Aligning today for a short while before it started raining ...
One for certain I hate these straight axles... Im going to have to build the skirting to make the fenders look somewhat good on it..
In the pics side view from behind the fender it sits at 4.5 inches and front at 4 inches below the bottom of frame in order for it to look decent.. if I lift it up the space between the edge of tire and fender gap is huge and looks like horses chitt.
I mustve paced back and forth to wear out a path between the tires and 5 feet back from them for the times I went back and forth on one side only.
Lots of head scratching and moving...
Its not a problem .. its just an obstacle..
I,ll do some 4 inch skirting next..so it will then look like this or close..better than looking at half foot of fenders dragging under the tear...
I,ll have to order some drop axles by slow boat come winter. Cause I aint going to do it now..
Here are some pics ...
Classic Finn
One for certain I hate these straight axles... Im going to have to build the skirting to make the fenders look somewhat good on it..
In the pics side view from behind the fender it sits at 4.5 inches and front at 4 inches below the bottom of frame in order for it to look decent.. if I lift it up the space between the edge of tire and fender gap is huge and looks like horses chitt.
I mustve paced back and forth to wear out a path between the tires and 5 feet back from them for the times I went back and forth on one side only.
Lots of head scratching and moving...




I,ll have to order some drop axles by slow boat come winter. Cause I aint going to do it now..
Here are some pics ...
Classic Finn