Teardrops n Tiny Travel Trailers

I goofed up by placing my tail lights a little close to the trailer. I left enough room for a small tag, and in KY a camper's tag is as big as an automotive plate. So I decided to make one that would fold down while not on the road. Plus it needed to be lighted. So here is what I came up with. Here it is in the up position for travel.mg]And here it is in the down position.Here are two close up's, so if anyone out there may need a foldable plate bracket here is a possible solution.This one is from the bottom, looking up. Sorry but I guess one cannot glean much from this last photo. But then again who knows. I know, I know, I need a little practice with this tex and photo's thing.

That's a cool idea. Most folks would have just found a way to attach it to the hatch, and jury rigged the wiring. You did a nice job!

Mike...

Great idea! For the photo's and text thing, just push "end" and then return and it will take you to the next line without messing up the Img. I skip a line so it is easier to read.

Ron... You sure did a fine job on that folding tag bracket. That thing is beefy enough you could attach a folding down table to it!

Hey thanks folks. I just made is from some 1" scrap sq. tubing I found laying around. So it is pretty stout. Thanks again

Nice design, Ron - and very well done!

Smooth idea. I like it.