Teardrops n Tiny Travel Trailers

I have drawn up my preliminary plan for a 5x10 Benroy with some additional height. I've ordered 5x10x3/4 plywood for the sides. I also ordered my Flexiride axle. I'll build the frame once the axle arrives which is the easy way out of a lot of the design issues I read about.

I have not been able to find any details on the Lil Diner booth/table. I've searched the threads w/o sucess. I would like to work a footwell booth and table into my design. I saw the footwell and the two vertical plywood pieces coming out of the foot well on the Lil Diner sticky. any suggestions, links?

Check out the 'Diner Journals on my site.
Everything I did is documented there.
Diner 1
Diner 2
I cover the seat construction in greater detail, in my builders manual.

You can find information on the table legs here...

http://tnttt.com/viewto ... =tab+table

Mike...

Thanks Steve and Mike. An order is on its way to Steve for builders manual.

Where can I find a picture of the outside table that mounts in a piece of square tubing welded under the frame?