Teardrops n Tiny Travel Trailers

by **Classic Finn** » Tue Oct 09, 2007 5:19 am

Hi Folks ... I was wondering as to what type of screws you have used to permanently set your ceiling fan or vent?

I just want to see if there are specific screws to use or not?

Classic Finn

by **toypusher** » Tue Oct 09, 2007 5:34 am

I used the powercoated ones that came with my Fantastic Fan. If you don't have them, I would recommend using Stainless Steel. I also used polyurethene caulk.

by **Classic Finn** » Tue Oct 09, 2007 5:57 am

toypusher wrote:I used the powercoated ones that came with my Fantastic Fan. If you don't have them, I would recommend using Stainless Steel. I also used polyurethene caulk.

Hi Kerry

No screws with the fan..but ok Im off to get the Stainless Screws.. Ive got the caulk...

Thank You

PS Ive got the vinyl here now as well so lots to do.. :twisted:

Heikki

by **Mike C.** » Tue Oct 09, 2007 6:45 am

Heikki,

No fan in ours, but the roof vent was installed with stainless steel screws.

by **Classic Finn** » Tue Oct 09, 2007 7:55 am

Mike C. wrote:Heikki,

No fan in ours, but the roof vent was installed with stainless steel screws.

Yup I got a good bunch of Stainless Screws to use.. just wanted to make sure..

On the Road Again :lol:

Heikki

Teardrops n Tiny Travel Trailers

Fan Install Question

Fan Install Question

Who is online