Teardrops n Tiny Travel Trailers

Hi Folks ... I was wondering as to what type of screws you have used to permanently set your ceiling fan or vent?

I just want to see if there are specific screws to use or not?

Classic Finn

I used the powercoated ones that came with my Fantastic Fan. If you don't have them, I would recommend using Stainless Steel. I also used polyurethene caulk.

toypusher wrote:I used the powercoated ones that came with my Fantastic Fan. If you don't have them, I would recommend using Stainless Steel. I also used polyurethene caulk.

Hi Kerry

No screws with the fan..but ok Im off to get the Stainless Screws.. Ive got the caulk...

Thank You

PS Ive got the vinyl here now as well so lots to do..

Heikki

Heikki,

No fan in ours, but the roof vent was installed with stainless steel screws.

Mike C. wrote:Heikki,

No fan in ours, but the roof vent was installed with stainless steel screws.

Yup I got a good bunch of Stainless Screws to use.. just wanted to make sure..

On the Road Again

Heikki