ARG!!!!! I need another source for these......

[WarPony]

I called Austin Hardware to order 4 and they only have one!!!! I need these quickly so I can have doors on for MadJack's B-day jam!!

Jeff

http://www.austinhardware.com/product.asp?dept%5Fid=30&pf%5Fid=542

Sorry, I couldn't get the picture up so I had to put the URL there instead.

[caseydog]

If you don't find the hinges, there's always duct tape.

CD

[n8ncl]

Have you tried McMaster Carr on line.

[Sonetpro]

Those look like boat deck hinges. You might want to try the boat sites. Overton's West marine, Sailor sam's..ect.
Found these they are close but not offset.




http://www.overtons.com/modperl/product ... 21094&aID=

[Mark72]

Marine hinges are usually great quality but I can't find any with an offset!
You don't ask for much Jeff but i'm googled out. Good night sorry I couldn't help.

Mark

[kurtibm]

You might contact Cleveland Hardware and ask if they have a stocking dealer of their #2432-2; that is, after you check the catalog to be certain that's what you need.
Catalog >http://www.clevelandhardware.com/catalog_individual_items/90.html (scroll down to 2432-2)

Contact >http://www.clevelandhardware.com/contact.html

kurt

[Classic Finn]

We have them hinges here at the Marine Center also.. and I know for sure they have them offset also..good quality..

Classic Finn

[WarPony]

Kurt, baby!!! U da' man!!! That's exactly what I was looking for!!!! I didn't get this in time to give them a call today but I will in the morning. I sure hope they have 4 left .................

I appreciate all the help .........

Jeff

[kurtibm]

I believe that they are a wholesaler, selling in bulk to businesses that would supply you and I. I doubt that they'd sell you just 4 - of course, that would depend on your powers of persuasion I guess. Likely, what you'll need/want to do is find out who buys that P/N from them regularly and get the hinges there. Mind you that this is conjecture.

Good Luck!


kurt

[Podunkfla]

How about these:


http://www.vandykes.com/product/02216699/

[Nitetimes]

How about these:

Those are really nice hinges!!
At 7 bucks a pair you can't beat the price but I wonder about the quality???
I might have to order a couple pair just to see for myself.

[WarPony]

Won't work Brickster...... I have a flange all the way around my door so a flat hinge won't work. Well, it will but I'd have to...............



................. now I've got another option to think about.




Jeff

[Podunkfla]

How about these:

Those are really nice hinges!!
At 8 bucks a pair you can't beat the price but I wonder about the quality???
I might have to order a couple pair just to see for myself.

I've been getting cabinet hardware, hinges and other stuff from VanDykes for many years... I have yet to be disappointed with the quality. They generally tell you about being imported, finish, and other quality details. Good company to deal with.

[Podunkfla]

Won't work Brickster...... I have a flange all the way around my door so a flat hinge won't work. Well, it will but I'd have to...............



................. now I've got another option to think about.




Jeff

Yep... some homemade aluminum shims traced off from the hinges wouldn't be all that hard to make? Their price is sure right.

[Nitetimes]

... I have yet to be disappointed with the quality. They generally tell you about being imported, finish, and other quality details. Good company to deal with.

Sounds good, guess I'll have to give them a try then.