Page 1 of 2

Made New fender for my Tear Drop --- up-dated new pics

PostPosted: Wed Oct 24, 2007 9:03 am
by legend lime
I didn't like the fenders I installed on my TD because they left an opening from the fender to the side of the trailer, so I took one of the fenders and used the out side profile to make the black portion of the Mold, picked up some supply's and made my own fender. The fender that was on the TD was only 8" wide and this fender is 11 1/2"W and has a built in mounting surface on the inside of the fender. Now only one more to make.

Mold with wax and PVA Applyed
Image
Gel-Kote Applyed
Image
First layer of glass installed
Image
Last layer of glass installed
Image
Fender ready to come out of mold
Image
Completed fender
Image
Fender almost ready to install
Image

PostPosted: Wed Oct 24, 2007 9:09 am
by toypusher
Nice job!

PostPosted: Wed Oct 24, 2007 9:12 am
by madjack
:thumbsup: :thumbsup: ................................................................ 8)

PostPosted: Wed Oct 24, 2007 9:44 am
by Podunkfla
Very cool... It looks beefy too! :thumbsup:

PostPosted: Wed Oct 24, 2007 10:34 am
by DBizer
How 'bout 3 more? I'll take a pair!!!
Looks good!

PostPosted: Wed Oct 24, 2007 10:57 am
by Alphacarina
Very nice!

Don

PostPosted: Wed Oct 24, 2007 11:41 am
by Mike C.
:) Great looking fenders. :thumbsup:

Did you make your own molds?

Is this something you do for a living? :thinking:

Seems like you've got the process down.

PostPosted: Wed Oct 24, 2007 1:02 pm
by Tcurr
looks awsome

PostPosted: Wed Oct 24, 2007 4:31 pm
by MOKI SEAKER
Looks great. :thumbsup: :thumbsup: jim g

PostPosted: Wed Oct 24, 2007 7:13 pm
by legend lime
Mike C.
YA I made the mold to, and no I don't do this for a living just something to help keep my PTSD in check. I was 3 years Army and 37 years Air Force until 23 Aug 07.

Son with same

PostPosted: Tue Oct 30, 2007 6:09 pm
by prohandyman
Legend
Thank you for your service.
Son just got out 31March, 100% disabled from military and VA, for PTSD and leukemia. Helping me at times with the tear under construction. I like the fenders. Are you going to market them?
Thanks
Dan

PostPosted: Tue Oct 30, 2007 6:16 pm
by mikeschn
Very nice Legend. You should keep the molds... as you can see, there is definitely an interest!

MIke...

PostPosted: Tue Oct 30, 2007 7:34 pm
by Classic Finn
Very Nice Fenders :applause: :applause: :applause:

Classic Finn :thumbsup:

PostPosted: Wed Oct 31, 2007 8:49 pm
by legend lime
Here is an up-date on the fenders they are complete and installed I like these a lot better than the ones I install the first time.

Image
Image
Image
Image
Image
Image
Image

PostPosted: Thu Nov 01, 2007 6:27 am
by Classic Finn
Awesome :applause: :applause: :applause: Youve done a Finntastic Job on them... :thumbsup: :thumbsup: :thumbsup:

I want a set.. ;) :thumbsup:

Classic Finn ;)