Page 1 of 2

Got some pics

PostPosted: Wed Nov 14, 2007 9:35 pm
by ChickenFoot
Hey Guys, I finally sat down and figured out how to upload pics to my photo album this evening and I posted a few on them. I started building my Generic Benroy in mid-October and I wish to thank yall for all the info on this great web sit. Take a look at them when you get a chance. I plan on using epoxy (boat hull) paint on the outside and do a light stain on the inside. I fitted the a/c today and tried it out (drain like it should with no leaks). I will be posting more pics as I go (now that I know how).

PostPosted: Wed Nov 14, 2007 10:16 pm
by tonyj
Very nice progress. :thumbsup: :thumbsup: :thumbsup:

PostPosted: Wed Nov 14, 2007 10:34 pm
by peggyearlchris
:) Chickenfoot, it's looking great. Have fun. :thumbsup: :thumbsup: Peg

PostPosted: Wed Nov 14, 2007 11:50 pm
by Podunkfla
Chickenfoot... It looks like your on the home stretch now! Lookin good. :thumbsup:

PostPosted: Thu Nov 15, 2007 12:03 am
by sdtripper2
You go Foot Image

Your well on your way ~ 8)

PostPosted: Thu Nov 15, 2007 8:56 am
by Tcurr
Looking good, great work.

PostPosted: Thu Nov 15, 2007 8:57 am
by Tripmaker
Hey it's looking great. Keep up the good work. I just used polyurathane with no stain on my birch on the inside. The poly darkened it just a little. I like the way it turned out.

PostPosted: Thu Nov 15, 2007 7:33 pm
by jeepr
Looks great. I like the little storage area over the kids head, over the cup of coffee, that looks like a little porch. That's neat design.

PostPosted: Thu Nov 15, 2007 7:36 pm
by toypusher
Tripmaker wrote:Hey it's looking great. Keep up the good work. I just used polyurathane with no stain on my birch on the inside. The poly darkened it just a little. I like the way it turned out.


For a slightly different look, use Minwax 'Natural' stain and then poly coat it!! It helps bring out the grain of the wood better. You can see some examples in my build photos.

PostPosted: Thu Nov 15, 2007 7:43 pm
by mikeschn
Looking good foot. Keep the pics coming.

Mike...

PostPosted: Thu Nov 15, 2007 10:22 pm
by Weerider
Good job Chickenfoot :thumbsup: Really lookin' good :thumbsup:

Howard

PostPosted: Thu Nov 15, 2007 10:34 pm
by swissarmygirl
:applause: :thumbsup:
Lookin' good!

PostPosted: Thu Nov 15, 2007 10:47 pm
by Mike C.
Grrreeaaattt Job Chickenfoot!!!!!

I really like the fact that you are going to have a bookcase for the wife's books. :thumbsup:

Really looks good. :)

PostPosted: Mon Nov 19, 2007 6:59 pm
by ChickenFoot
I got a lot of filling and sanding done today. Welded the tongue jack in place, a/c installed and wired also. I made some fenders and mounted them. They like the Benroy profile. Ihope yall enjoy them.

PostPosted: Mon Nov 19, 2007 9:47 pm
by Weerider
Lookin' good there CF. :thumbsup: Boy! you are flying on your build.

I see how you are dealing with the water discharge from your AC but how are you exhausting the hot air from the rear and where is the cooling air coming from? :thinking: You must have it taken care of, I just can't tell form the pictures. :thinking:

Good job :thumbsup:

Howard 8)