Removable Partition
Posted: Fri Jan 11, 2008 10:06 pmI am building a 5' wide Benroy. I would like to install a removable partition so I can make the sleeping area into two seperate sleeping compartments. Any ideas?
Teardrops n Tiny Travel Trailers
or t n ttt for short (tnttt.com)
https://www.tnttt.com/
Removable Partition
Page 1 of 1
Posted: Fri Jan 11, 2008 10:06 pmPosted: Fri Jan 11, 2008 11:30 pmMaybe a pieces of rope & a blanket strung from side to side??? Quick,cheap & easy too!
Posted: Sat Jan 12, 2008 1:24 amMaybe an accordian made out of some lightweight material, cloth and luan maybe, supported from the ceiling and tied to the front and rear at the floor. Collapsing the accordian folds would allow it to be removed through the doorway. If it is being used primarily to prevent those awkward John Candy "those aren't pillows" moments it could also be made shorter than full ceiling to roof.
Posted: Sat Jan 12, 2008 6:08 amWe just made a heavyweight privacy curtain that divides our TD ... "room darkening quality " is good for the sleepers...light and cheap ...and decorative... 
Posted: Sat Jan 12, 2008 11:13 amHow separate do the areas have to be? Are we talking 100% privacy, or just sort of, "I don't want to drool on my hunting buddy" kind of privacy?
Also, will the mattress be split?
Also, will the mattress be split?
Posted: Sat Jan 12, 2008 6:48 pmJohn Candy, Steve Martin - Planes, Trains, Automobiles. Yeah?
Andrew
Andrew
Re: Removable Partition
Posted: Sat Jan 12, 2008 7:04 pmrckclmer wrote:I am building a 5' wide Benroy. I would like to install a removable partition so I can make the sleeping area into two seperate sleeping compartments. Any ideas?
May we know why it needs to be seperated?
Re: Removable Partition
Posted: Sat Jan 12, 2008 7:54 pmDooner wrote:rckclmer wrote:I am building a 5' wide Benroy. I would like to install a removable partition so I can make the sleeping area into two seperate sleeping compartments. Any ideas?
May we know why it needs to be seperated?
Do we want to?
Posted: Sat Jan 12, 2008 9:58 pmIf you don't need real privacy a metal mini blind from the ceiling or up from the floor.
Any 4 fold board that attaches to the ends of the TD.
A fan fold door that is cut off.
to the playground.
Oh yeah---corrugated plastic stuff.
Any 4 fold board that attaches to the ends of the TD.
A fan fold door that is cut off.
to the playground.
Oh yeah---corrugated plastic stuff.
Re: Removable Partition
Posted: Sat Jan 12, 2008 11:52 pmKevin A wrote:Dooner wrote:rckclmer wrote:I am building a 5' wide Benroy. I would like to install a removable partition so I can make the sleeping area into two seperate sleeping compartments. Any ideas?
May we know why it needs to be seperated?
Do we want to?
I just wanted to see how seperated he really needs it. But you might be right.
Posted: Sun Jan 13, 2008 10:09 amMy idea is not so much as a partition,but one cot is going to be about 16" off the floor and the other is on the floor,just to keep those awkard moments at a minimun. 
Posted: Sun Jan 13, 2008 11:18 amdavis131 wrote:My idea is not so much as a partition,but one cot is going to be about 16" off the floor and the other is on the floor,just to keep those awkward moments at a minimum.
I guess technically you could make the other half of the bed raise and lower to facilitate the loss or gain of awkward moments.
If you just want separation of a single piece mattress then a hinged (so it is removable) board is easiest.