Teardrops n Tiny Travel Trailers

Posted: **Mon Jan 21, 2008 9:35 pm**

I am planning on using the 15" x 18" and 15" x 30" size crank out windows from Lil' Bear on my tear, can anyone who has installed these tell me the exact size rectangle you had to cut? Can I go ahead and frame in exactaly 15x18 and 15x30, or are the windows over/undersize? Thanks.

Mike

Posted: **Mon Jan 21, 2008 9:50 pm**

Why don't just send Grant @ Lil' Bear an email and ask him. He'll give you an exact answer and not even bit. So simple of a thing to do. Although he's most likely on the road right now and won't get back to you for a day or two, maybe sooner. :thinking:

Posted: **Mon Jan 21, 2008 11:34 pm**

I did sent an email before I posted this here, awaiting his reply. I just figure someone has installed them, perhaps they rememberd the size hold they cut for them.

Posted: **Mon Jan 21, 2008 11:56 pm**

He's been busy this weekend. Should be home sometime tonight.

My summer project has arrived.

Posted: **Tue Jan 22, 2008 12:30 am**

I cut mine 15x 18 but had to cut a little relief at the corners to allow the screws on the frame to clear. An 1/8" in width and height won't hurt and they will slip in easily and you'll still have plenty of lip left for install. I've installed 10 of them. Doug

Posted: **Tue Jan 22, 2008 1:37 am**

Perfect, thanks!

Posted: **Tue Jan 22, 2008 6:21 am**

http://tnttt.com/viewto ... highlight=

Posted: **Tue Jan 22, 2008 3:30 pm**

I did try and search, but it would not have pulled up that therad with dimension spelled wrong :lol:

Thanks for the help guys.

Mike

Posted: **Tue Jan 22, 2008 5:20 pm**

G-force wrote:I did try and search, but it would not have pulled up that therad with dimension spelled wrong Thanks for the help guys.

Mike

I did try and search, but it would not have pulled up that therad with dimension spelled wrong Laughing Thanks for the help guys.

Mike

Ya want to build a trailer, or correct spelling? :lol: