Page 1 of 1

Need Help With 3/4 Door Seals

PostPosted: Wed Mar 19, 2008 11:50 am
by klattin3
what is the best way to seal a 3/4 wall door and what about door handles??. Any ideas will be read and appreciated. Thanks in adv. Keith
Ive looked at every pic i could and still dont get it. :oops:

PostPosted: Wed Mar 19, 2008 2:39 pm
by halfdome, Danny
Keith, check out Grant Whipp's website. Grant carries an offset aluminum hinge for 3/4" doors that seals and he also carries the "T" molding that the leg (of the "T" molding) is attached along the edge of the door with stainless steel screws. Grant also sells the door seal that is self adhesive along the "T" that overhangs the door. You'll also finddoor handles ,windows, fenders etc. You'll need to apply a sealant when screwing and when applying trim to your doors. If your still in the dark Grant will set you straight. :D Danny

PostPosted: Wed Mar 19, 2008 6:43 pm
by klattin3
Thanks danny, I saw that awhile ago but i guess i forgot about it. Thats exactly what i need.