Page 1 of 1

Hatch Seal question

PostPosted: Sun Sep 21, 2008 1:08 pm
by Classic Finn
Hey folks I,m about to add seals to the hatch and now Id 1st like to seal up the very lower section that sits to the end of the tear frame.

Can anyone tell me how to do this please and what kinds of seal have you used?

I guess this photo is as good as any I have to show which seal is in question.

Image

Classic Finn ;)

PostPosted: Sun Sep 21, 2008 5:09 pm
by Classic Finn
:roll: :roll: :thinking:

PostPosted: Sun Sep 21, 2008 6:51 pm
by 2bits
I was planning on using Grant's Hatch seal on the side and bottom edges of the hatch, at the bottom of the page:

http://www.lilbear.teardrops.net/parts.html

$1 per foot.

Image

PostPosted: Mon Sep 22, 2008 7:46 am
by SkipperSue
2bits wrote:I was planning on using Grant's Hatch seal on the side and bottom edges of the hatch, at the bottom of the page:

http://www.lilbear.teardrops.net/parts.html

$1 per foot.

Image


I bought the same seal from Grant, but I haven't installed it yet.

PostPosted: Mon Sep 22, 2008 11:13 am
by shadowhaus
How does it attach? Do you glue it? Would that be used on the side wall or on the hatch?

PostPosted: Mon Sep 22, 2008 11:41 am
by Classic Finn
I guess in all honesty I also have to ask as how that is installed?

Classic Finn ;) :thinking:

PostPosted: Mon Sep 22, 2008 11:46 am
by SkipperSue
Classic Finn wrote:I guess in all honesty I also have to ask as how that is installed?

Classic Finn ;) :thinking:


I'm planning on gluing it on the hatch side with weather strip adhesive. I'm not sure if that's the way most do it or not but it seems like it should work ok.

PostPosted: Mon Sep 22, 2008 1:14 pm
by grant whipp
SkipperSue wrote:
Classic Finn wrote:I guess in all honesty I also have to ask as how that is installed?

Classic Finn ;) :thinking:


I'm planning on gluing it on the hatch side with weather strip adhesive. I'm not sure if that's the way most do it or not but it seems like it should work ok.


Hey, Guys ...

... it has a self-adhesive strip already on it ... :D ...!

CHEERS!

Grant

PostPosted: Mon Sep 22, 2008 1:22 pm
by Classic Finn
grant whipp wrote:
SkipperSue wrote:
Classic Finn wrote:I guess in all honesty I also have to ask as how that is installed?

Classic Finn ;) :thinking:


I'm planning on gluing it on the hatch side with weather strip adhesive. I'm not sure if that's the way most do it or not but it seems like it should work ok.


Hey, Guys ...

... it has a self-adhesive strip already on it ... :D ...!

CHEERS!

Grant


Duahhhhhh.. Now if that aint easy enough then.. :lol: :o Straight from Da Man himself. No further questions :lol:

Thank You Grant :applause: :thumbsup: :oops:

PostPosted: Mon Sep 22, 2008 5:50 pm
by SkipperSue
Yep this is true, but I was going to put some weather strip glue on the hatch side just to make sure it will stick real good. :R

PostPosted: Mon Sep 22, 2008 7:59 pm
by 2bits
grant whipp wrote:Hey, Guys ...

... it has a self-adhesive strip already on it ... :D ...!

CHEERS!

Grant



Nice! Thanks!