Got the frame done (almost)
Posted: Tue Apr 26, 2005 11:41 pmI got my steel and dropped it off at my buddy’s shop yesterday.
http://www.jkcustoms.com
Today, I went over there around 7:30 to start working on it. I cut the miters and cut everything else to length, then I set it up and had my neighbor weld it up. Two and a half hours later, my frame was done (except for paint, chains, and lighting). I towed it home without lights, tag, or chains; it is only 3 miles. The roofing compound is still not dry (I guess I put on too thick). I’ll find out if it fits this weekend.
Started with this:
<IMG SRC="http://www.teardrops.us/userfiles/asianflava/P4260044.JPG">
2 and a half hours later:
<IMG SRC="http://www.teardrops.us/userfiles/asianflava/P4260050.JPG">
http://www.jkcustoms.com
Today, I went over there around 7:30 to start working on it. I cut the miters and cut everything else to length, then I set it up and had my neighbor weld it up. Two and a half hours later, my frame was done (except for paint, chains, and lighting). I towed it home without lights, tag, or chains; it is only 3 miles. The roofing compound is still not dry (I guess I put on too thick). I’ll find out if it fits this weekend.
Started with this:
<IMG SRC="http://www.teardrops.us/userfiles/asianflava/P4260044.JPG">
2 and a half hours later:
<IMG SRC="http://www.teardrops.us/userfiles/asianflava/P4260050.JPG">
