Teardrops n Tiny Travel Trailers

What size screw do people recommend for attaching 1/4 exterior ply (skin) to framing? I'm thinking #10. I'll have aluminum trim on ply attached to framing.

Thanks

I recommend a brad nailer from harbor freight. I used this to build 2 t/d's...

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46309

Second that. I used glue and a brad nailer.

For my sides (3/4" birch on pine framing) I used Titebond III and drywall screws. On my roof (1/8" birch on pine spars) I used PL adhesive and staples.

...personally, i would use a brad/staple gun(shooting staples) with TiteBond III................................

p.s. if you just gotta use screws, I would recommend a #8x1" drywall screw...you could go shorter but they get hard to hold onto...#10s are way overkill and #6s are too prone to breaking/stripping............MJ