Teardrops n Tiny Travel Trailers

Here we have a dealer that just got a new shipment of wheels in. Anyone use any of these for their tear? In my opinion they would look good. What do you think?

Porsche 914 4 x 130mm. Size: 15 x 5,5". Offset: 26mm



Below:

Empi 5-spoke - 5,5x15" 4 x 130mm. . Offset: 20mm

Nice wheels heiki
The Empi 5 spoke are very popular with the VW crowd. They look like they have the same wide stud pattern that Grizz is using on the Grizpod.

I like the chrome rims too

How are your spoked wheels coming along ? There in a totally different league.

Dave

jackdaw wrote:Nice wheels heiki
The Empi 5 spoke are very popular with the VW crowd. They look like they have the same wide stud pattern that Grizz is using on the Grizpod.

I like the chrome rims too

How are your spoked wheels coming along ? There in a totally different league.

Dave

Nice to hear from you Dave I havent done too much with them spoked ones yet. Cleaned em up a bit but not to the point they look real great yet. Just too cold out

I wish they had the direct 4 x 100 or 5 x 112 instead of the ones mentioned. Then they could fit directly, however Ive learned how to go about getting around that

Hello Heiki

have you seen these wheels that you can buy in Sweden

http://www.alven-ingvarsson.se/fälgar/cragar/81-smoothie

If they dont fit your axels you can buy wheel adapters from your lug pattern to a standard 4,5 "

How cold is it in Finland now? We have -4 tonight in Denmark.

Shane wrote:Hello Heiki

have you seen these wheels that you can buy in Sweden

http://www.alven-ingvarsson.se/fälgar/cragar/81-smoothie

If they dont fit your axels you can buy wheel adapters from your lug pattern to a standard 4,5 "

How cold is it in Finland now? We have -4 tonight in Denmark.

Hello Shane long time no see. Was wondering what happened to you.
Right now its -15.7 celcius here in the Ice Box

Ohh yeeeeeees my favorite 81 - Smoothies Thanks for the link shane. Been looking for those all over but no go.
Scandinavian telepathy Stay warm my friend.

thanks Heiki

Here you can get wheel spacers http://manton.se/#

Do you understand swedish? I can translate for you if you need it.

/Shane

Shane wrote:thanks Heiki

Here you can get wheel spacers http://manton.se/#

Do you understand swedish? I can translate for you if you need it.

/Shane

Hej Shane tak för det websidan. Jag forstår svenska okså ingen problemet för mej;)

Spacers are not allowed here so Ive overcome that by taking the entire hub and wheel over to a buddy of mine to redo or machine new ones and make fit sort of legally. Little extra work and pain but its been done on my present tear and the inspectors didnt recognize it at all.

You mean like these?

prohandyman wrote:You mean like these?