Cramming a Crapper into a Teardrop

Hello Everyone,
Not sure if this has been done before, but I haven't come across it during all my lurking.
In my design I needed to have a spot for a porta potty in my teardrop. So I figured on a drop down area in the interior cabinet.
This is a picture of it in the up position.
This is a picture of it in the down position.
Here is a picture of the door closed.
I went back and forth on the lift mechanism, linear motor or pulley's and cable.
Cable won out only due to the fact it will have no drain on electrical systems and it will still work if the kids crank the stereo all day.
Not sure if this has been done before, but I haven't come across it during all my lurking.
In my design I needed to have a spot for a porta potty in my teardrop. So I figured on a drop down area in the interior cabinet.
This is a picture of it in the up position.
This is a picture of it in the down position.
Here is a picture of the door closed.
I went back and forth on the lift mechanism, linear motor or pulley's and cable.
Cable won out only due to the fact it will have no drain on electrical systems and it will still work if the kids crank the stereo all day.