Teardrops n Tiny Travel Trailers

Does anyone have drawings of various details for where the curved hatch meets the side wall?
Thanks, Eric.

No drawings but I have plenty of pictures on how I did mine. I used Steve Frederick's method.

http://littleswissteardrop.com/thegalleyhatch.html

Eric,

Mark's wall to hatch seal design is what I'm planning on using (by the way...Thank's Mark for the detailed pics and discription!) At first glance it didn't make sense, but after staring at it for a little bit, I got the concept and made perfect sense.

This is how I did mine.


Lee

Hi Mr Wolf, Evan here from Scotland. You can find loads of pictures in the Galley section which can be found in the important information thread. I think most people get there ideas there and adapt them to suit their needs. If you want you can always go to the Build journal section and sift through the various builds. I found a method that really works and has been well tested in Glencoe without a leak so that says something. My build is called "Rover Returns" if you want to see how I did it. Personally I would just see what others have done and make my own plans rather than paying for something t hat is free on this site. All the best with your build, Evan. Just for Today I will have a plan, I may not stick to it but it will save me from two enemies Hurry and Indecision. Author unknown.