5x8 plywood
Posted: Sun Jul 24, 2005 6:16 pm
where can i locate some .lowes and hd doesnt stock anything in that size ? where can i locate some .lowes and hd doesnt stock anything in that size ?Page 1 of 1
Posted: Sun Jul 24, 2005 6:16 pm where can i locate some .lowes and hd doesnt stock anything in that size ?Posted: Sun Jul 24, 2005 6:28 pmhttp://tnttt.com/viewto ... x+8+sheets Maybe this link would be a place to start.
Posted: Sun Jul 24, 2005 7:13 pm...old mom&pop lumber yards, your local cabinet shop, a marine repair facility, are some places to checkout. You may want to contact, len#####(that's len area code) on this board, he is in Pa. and may be able to point you in the right direction...we get almost all of our specialty ply thru a cabinet shop located behind our shop
good luck, sometimes the hunt for materials seems like hunting for the holy grail
madjack
good luck, sometimes the hunt for materials seems like hunting for the holy grail
madjack
Posted: Sun Jul 24, 2005 7:32 pmYou can make your own, buy three 4 x 8 plywood sheets half the thickness you are going to use, glue two overlapping one foot each side; cut two one foot pieces from the third sheet
and glue them on each other side.
Raul
and glue them on each other side.
Raul