Page 1 of 1

Latching the hatch

PostPosted: Fri Jul 29, 2005 7:50 pm
by Ken
I need decent looking hatch latching hardware. Something better than the grey HD galvanized steel latch you would use on a barn door. Looking for an internet order source.

PostPosted: Fri Jul 29, 2005 8:20 pm
by Gerdo

PostPosted: Fri Jul 29, 2005 8:40 pm
by jimslack
I just received a dead bolt rod lock from Austin Hardware. It seems very well made.

http://www.austinhardware.com/product.a ... 8NPD500439

PostPosted: Sat Jul 30, 2005 2:19 am
by bledsoe3
Jim, How can you go wrong for nine and change. I'm a ways from building my hatch, but that looks good. :thumbsup:

PostPosted: Sat Jul 30, 2005 6:17 am
by randy chesnutt
ken, i built a box to cover the hardware. i maded the lid where it could be removed for maintance. i used the luana drops from the kitchen, that way it would match. it looks really neat.

PostPosted: Sat Jul 30, 2005 5:44 pm
by Gerdo

PostPosted: Mon Aug 01, 2005 11:46 am
by kurtibm
I've used two interior "cab latches" (lower photo) with "T" handles on the exterior.... (one on each side about 8"inboard)

Image

Image

kurt

PostPosted: Mon Aug 01, 2005 3:51 pm
by Gerdo
How bout a simple strap? Image