L handles
Posted: Mon Jul 11, 2011 7:08 pmI am looking for a inside door handle that fits a 3/8" square shaft all others are 5/16" The outside is a Bergman H 20-2
Page 1 of 1
Posted: Mon Jul 11, 2011 7:08 pmPosted: Mon Jul 11, 2011 8:20 pmJust a dumb suggestion, you could always file 1/32 of an inch off each side to make the end of the shaft 5/16.
Posted: Tue Jul 12, 2011 3:34 amThats what I'd do.
Posted: Tue Jul 12, 2011 10:51 amFile, nothing! Use a power grinder, with a little finesse of course. Actually a belt sander would make it a quick, easy job. Watch your fingers! I usually end up removing my finger prints when I do fine sanding / grinding work like that 
Posted: Tue Jul 12, 2011 3:37 pmI had thought of grinding it down but I got an email from Vintage Camper and they have two styles http://www.vintagecampers.com/parts.php ... &sub=Doors