Doors
Posted: Sat Sep 24, 2005 11:34 amWhere can I buy the aluminum molding to make my door edges and door frames? Thanks
Page 1 of 1
Posted: Sat Sep 24, 2005 11:34 amPosted: Sat Sep 24, 2005 1:25 pmI got my the aluminum trim for my gally hatch from Lowe's. After annealing the stuff seams pliable enough. So, I just picked up some more to do my doors, except for my T-moulding that I got from Tear Drop Fix-it Shop
Posted: Sat Sep 24, 2005 2:15 pmYep, TD Fix it Shop is the way I went.
Something I learned. If you use the HD 1/2" angle for the inside of the door (Use TD Fix it Shop T moulding for the outside) In the short radius trim the moulding down to 1/4" on the side that bends. Makes a huge difference and looks great.
Trimmed
NOT trimmed
Something I learned. If you use the HD 1/2" angle for the inside of the door (Use TD Fix it Shop T moulding for the outside) In the short radius trim the moulding down to 1/4" on the side that bends. Makes a huge difference and looks great.
Trimmed
NOT trimmed