Teardrops n Tiny Travel Trailers

Howdy -

Can someone please assist.

I am building the Cubby (well kind of) and in the PLANS for the hatch they call for a offset of 1/4in on the top as well as the bottom. When I start reading the posts about the hinges others have used I find that there are basically two suppliers - Lil Bear and Johnston. It seems that one of them has the necessary 1/4in clearance and the other does not.

Before I start making the hatch which hinge would work.

Thanks

Bill

Bill,

I built the Cubby and used the hinge from RW Johnson. It is black, or at least that's the one that he sent me. I don't know if he has another or not. I have some pictures in my Yahoo photos, but they are not real clear about the hinge.

http://pg.photos.yahoo.com/ph/toypusher/my_photos

Hope this helps

bill, i used johson hing with a quarter inch offset. it worked great. a heavy duty hing. the offset was taken care of by a peace of 1 1/2"x1/4" alum. flat bar. go to my photo album page 3 you will see what i did. if i build another tear i would use the same hing. i purchase one of those other hing and it was way to lite. yes mine was black.

Thanks for the info-

Checked his web page and could not find the hinge? Does he sell it anymore?

Thanks
Bill

Call him at (530) 878-0407. You may have to leave a message and he will call you back. I'm sure that he still sells them.

bill, you can not find it on his web page you have to call. i beleive i paid 39.00 for mine. but he is there so give him a call. i don,t know why he don,t have it on the web.

Excellent - will do and thanks

Thanks

Bill

Excellent - will do and thanks

Thanks

Bill