Page 1 of 1

Help locating part.

PostPosted: Tue Oct 04, 2005 8:26 am
by Endo
Does anyone have a source for the trim piece above the windows (rain diverter?). I sent a PM to George but no response. I'm not sure if he got it. I found them once but I can't remember the site. If I remember correctly the cost is minimal.

Thanks Endo

[img]http://www.tnttt.com/gallery/image.php?image_id=3202[img][/img]

PostPosted: Tue Oct 04, 2005 8:39 am
by goldcoop

PostPosted: Tue Oct 04, 2005 8:50 am
by madjack
...endo, we bought ours from a local RV dealer...seems they were less than 10 bucks for 2.......
madjack 8)

PostPosted: Tue Oct 04, 2005 8:53 am
by randy chesnutt
if you are talking about drip rails. rv parts and supply has them. that,s where i got mine. they don,t cost much.

PostPosted: Tue Oct 04, 2005 11:28 am
by angib
I use an on-line catalogue (similar to a catalog!) that seems to cover a huge number of RV dealers all round the US. This page shows drip caps.

If you go to http://www.go-rv.com, you can find a local dealer that carries this catalog's range.

Andrew

PostPosted: Tue Oct 04, 2005 1:58 pm
by IraRat
I need two that I can use above the doors that can be bent to semicircle to conform to the top of the door. Any ideas?

PostPosted: Tue Oct 04, 2005 4:07 pm
by Endo
angib wrote:I use an on-line catalogue (similar to a catalog!) that seems to cover a huge number of RV dealers all round the US. This page shows drip caps.

If you go to http://www.go-rv.com, you can find a local dealer that carries this catalog's range.

Andrew



Thank you! I didn't know the proper term (drip cap). That is exactly what I am looking for!

PostPosted: Tue Oct 04, 2005 4:12 pm
by Endo
IraRat wrote:I need two that I can use above the doors that can be bent to semicircle to conform to the top of the door. Any ideas?


Ira I bought drip rail molding from the Teardrop Fix-it shop for my first teardrop. I was able to bend it to the contour of the door.

Before I attached the door I used it as a "form" to shape the molding.