Page 1 of 1

Hardwood ply

PostPosted: Wed Jan 16, 2013 4:09 pm
by Javier_Pacer
Does any user know if 1/4 inch hardwood ply from lowesst tend to delaminate as Luan?

Re: Hardwood ply

PostPosted: Wed Jan 16, 2013 4:26 pm
by absolutsnwbrdr
I've used the thin hardwood ply from lowes (think it was actually about 3/16") on both my builds. If you can seal it well enough you shouldn't have any problems with delamination.

Re: Hardwood ply

PostPosted: Wed Jan 16, 2013 4:45 pm
by Javier_Pacer
Thanks, What type of sealer would you recommend, and second how did you attach to wood spars of wall without showing fasteners.

Re: Hardwood ply

PostPosted: Wed Jan 16, 2013 4:51 pm
by absolutsnwbrdr
I used CPES (clear penetrating epoxy sealer) on the edges, but everything was primered with Kilz, and then painted with Rustoleum enamels (which hid the screws).