Page 1 of 1
Walls leaning??
Posted:
Mon Mar 11, 2013 7:04 pmby Silvrzuki77
I got my walls up and just the basic top of my galley done. The top of the walls are leaning 1/4 to the driver side. How do i go about fixing this??? Frustrated!!!
Thanks
Chris
Re: Walls leaning??
Posted:
Mon Mar 11, 2013 8:56 pmby Wolfgang92025
Silvrzuki77 wrote:The top of the walls are leaning 1/4 to the driver side. Chris
Chris,
I would use use a square and a level to see if the walls are right. When using the level, make sure the trailer is level first before checking the plumb on the wall. Looking at you built pic's, I don't see a bulk head between your galley and sleeping area. If the piece of plywood is cut square, that should true up your walls.
Re: Walls leaning??
Posted:
Mon Mar 11, 2013 9:09 pmby Silvrzuki77
Thanks wolf, i added a 90 at the front which squared it to 90. Your right though i didnt think about the bulkhead. I think a beer to many may have frustrated me a little too soon. Thanks again!
Re: Walls leaning??
Posted:
Mon Mar 11, 2013 10:22 pmby Socal Tom
If you square up the counter you have in the back it should square up the walls.
Tom
Re: Walls leaning??
Posted:
Mon Mar 11, 2013 10:43 pmby Wolfgang92025
Silvrzuki77 wrote:I added a 90 at the front which squared it to 90.
Chis, just a little bump on the road to building what you want. Keep at it......
Re: Walls leaning??
Posted:
Tue Mar 12, 2013 9:36 amby webbaldo
If you cut your sides out of plywood, use the right-angle offcuts as braces.
Re: Walls leaning??
Posted:
Tue Mar 12, 2013 7:30 pmby suckerpunched
make alot of left hand turns,,,,,,sorry,,couldn't help it.....