Teardrops n Tiny Travel Trailers

I am pretty new to the forum and am about 2 weeks in to my build. My trailer is not a traditional tear drop. It just has the rounded front with a squared off back end. My trailer is 5x8 and so far it has been a fun build. I welcome any tips from guys who have already made mistakes and learned from them or realized a better way to do something. My build is very stout in design because it will eventually have a rack with two kayaks. I will post some pics of the progression this far in the build.

My little helper has enjoyed the build also.

Well this gets me to the fun smaller detail door framing and finish work.

Welcome, Nathan. Your build is kind of a cross between a Simple and a Rimple; or, sort of a rounded Simple: http://www.angib.pwp.blueyonder.co.uk/t ... tear00.htm.
I thought about a Simple/Rimple of your same design; but, my build just kept changing and getting more complex, as sometimes happens.
It looks like you're making good progress. Have you or will you be building a bunk across the non-air conditioner end for the little one who is in the pictures?

Yes there is a bunk in there for the little boss to she can toss and turn all she wants and not wake up mom and dad.

I don't plan on having A/C in my TD, but have read a lot of posts where people have had problems.

A lot of people avoid front mounted units because driving rain tends to find its way thru and around them. You should plan to make a travel cover for yours; one that seals against driving rain.

Another thing to look out for is that most modern A/C's keep some of the condensed water in the pan so that the fan can splash this up onto the condenser for efficient operation. You will need to add a provision to drain this water prior to travel (but still allow it to accumulate in use for proper function) otherwise it can slosh out and get on your bedding.

A Simple/Rimple was on my short list when I first got started doing this. If there is ever a second build for me it will be simpler.

Thanks for the tip KC

Getting my side door framed in and built.

And the amazing door is pulled off and on goes the amazing siding

I have no idea why my previous post kept saying amazing, but anyway I got some help with an extra set of hands over the weekend and made a lot of progress.
Now to skin the door, build and skin the a/c cover and trim everything. I can see some light at the end if the tunnel.

Looks good! Where did you find the window for the side door?

I got the window at Lowe's for I believe $38 because the RV windows were just to high with shipping.

Well its a little further along, i have set myself a deadline to be usable by the second weekend in june for a camping trip and so far so good. I doubt I will have the Galley finished by then though.

And the trim starts to go on, this thing is beginning to look like a camper after all.

Outside is getting very close to being done. That galley is still far from done.