48Rob wrote:Derson,
In a normal camping scenario ground moisture isn't going to be an issue.
If you store the camper in a wet area and the exterior of the floor isn't well sealed, the moisture may become a problem.
As for when you are camping, airborne moisture may become an issue in cold weather, as it will want to condense on the coolest surfaces.
The mattress, as pointed out will "insulate" the floor, but if there is space around the edges of the bed, moisture can condense there, and then soak into the bedding.
For most campers, it isn't an issue, but if you forsee a lot of cold weather camping, a thin layer of insulation on or under the floor isn't a bad idea.
Rob
Yeah that!
Depending on your build method, adding a relatively thin layer of insulation under the floor MAY pay dividends in the long run. I built my floor separately, mounted it on the trailer chassis, & built/added the rest of the cabin to that. After 'painting' the 'sticky black stuff' on the underside of the floor, I placed pieces of 1" Dow Blueboard in the spaces between the framework. A little construction adhesive & some scrap strips stapled in place as battens secured the foam insulation in place where it's been for nearly 8yrs & 22K+ miles. Our 'mattress' started out as a couple of 3" folding kids' 'play' mats with vinyl on one side & fabric on the other, that have since been replaced with 4" memory foam & a 1 1/2" egg crate pad. The 1" foam insulation in the walls, & the 1 1/2" in the roof have been of great value to us, both for cooling/warmth, & noise reduction. We've never had any problem with condensation in any form. I take my TD to an annual squirrel hunt in southern Illinois each September where we have a pickin' & grinnin' 'hoe down' on Saturday night. I've slept right through some pretty loud/wild parties when the pickin' gets mixed with consumption of copious amounts of adult beverages...
