Page 1 of 1

Trimming out door

PostPosted: Mon Mar 23, 2015 8:23 am
by Chpzenker
Hey guy's, I'm to the point of building my door and need some advice for trimming out my door. (Using 3/4 ply)

Re: Trimming out door

PostPosted: Mon Mar 23, 2015 7:43 pm
by backstrap bandit
I used the t molding and galley wall trim from grant but if u have any tight radiuses you will have to trim it but it's easy to do I will have to take some pics if u want to see

Re: Trimming out door

PostPosted: Mon Mar 23, 2015 8:57 pm
by Graniterich
I used an inner wood trim half inch smaller than the door, sealed in epoxy, used Grants D shaped gasket. Time consuming, but inexpensive

Re: Trimming out door

PostPosted: Tue Mar 24, 2015 12:53 am
by Chpzenker
Thanks for the help