aluminum in Nor Cal
Posted:
Thu Mar 17, 2016 5:42 pmby mariannf
Hi all,
Does anyone have suggestion about where to buy aluminum sheet in Nor Cal? I have a 5x10x5 design, and am only putting aluminum from end to end over the roof...so i will need a 20 foot sheet that is 5' wide. i have sub roof materials (3mm birch) so want a low gauge thickness.
any suggestions appreciated!
Re: aluminum in Nor Cal
Posted:
Thu Mar 17, 2016 7:23 pmby Redneck Teepee
Any sheet metal shop can order it in for you, or tell you where to order from, if the supplier sells to the general public.
Re: aluminum in Nor Cal
Posted:
Fri Mar 18, 2016 6:17 amby Dale M.
Re: aluminum in Nor Cal
Posted:
Mon Mar 21, 2016 2:25 pmby DaveS
Coast Aluminum in Hayward
http://coastaluminum.com/contact/I bought 5x12 sheets of .032 thick 5052 from them. They had it in stock Figured sheets would be easier to handle/install than coil. Make sure you ask to have protective film put on one side. Was no additional cost and saved me a couple of times.
Re: aluminum in Nor Cal
Posted:
Mon Mar 21, 2016 4:55 pmby vegask
SAF in Redding. Ask for David Emry if you need a sales rep. Shipping/freight is free on anything over 100lbs and they do anodized finishes.
Re: aluminum in Nor Cal
Posted:
Sun Mar 27, 2016 11:58 pmby SC Campbell
I get my aluminum from Cardo Industries in Sacramento
1054 El Camino Ave, Sacramento, CA 95815 · (916) 922-7824
cardoindustries.com