Teardrops n Tiny Travel Trailers

After many days and nights of hard work I have completed the exterior and have the interior to a useable level. It looks like I will make the Little Talbot gathering even after all the heavy rains!




The plywood recieved one coat of Minwax Puritan Pine, then the spruce trim was added and coated with 3 coats of Minwax Semi-Gloss Clear Shield. I plan to add more coats of Clear Shield in the upcoming weeks.

Now All I must do is finish the interior paint, cabinets, and galley. But we plan to use it in its current state.

Lee

DFear Lee,

Good going. Post some construction pics.

...I am a big fan of ClearSheild myself realy looks good, don't let them boys at Talbot try to give ya any wooden nickels for it
madjack

clems , way ta go, Good lookin!
What are the deminsions on that? What are ya gonna call it?
How about some pics of the inside?

Its 66 5/8 inside width, 11 ft. long(extra foot gained with curve in front so effectively 12' long) and body 54" tall. The width was determined by size needed for frame to extend over wheels on HF trailer.





Right now the interior is bare, just walls and a shelf over the foot area and the galley is very basic.

Lee

So do you have wheel wells inside, or does it just go over the top of the wheels?

no wheel wells, the axle only able to move up 2 inches before bottoming out on the leaf spring holder. Similar to Dee's Zephyr build. The floor of 2x4's with 3/4 ply overhangs the wheels.

Looks good!! At least it is usable. The details come later.
Happy Camping!

hey clems, where in n.e. fl are you? i'm in the jacksonville area. i havent started my build yet...trailer should come by fed ex this week but i'm gonna try to drive out to see the td's at talbot. maybe you could let me take a look at your work.