Teardrops n Tiny Travel Trailers

Just wondering... I found a place to buy all kinds of clamps...at a good price. so silly as it may seem but what is the minimum amount of clamps
you folks have used for your project?... or Maximum and what sizes?


Classic Finn

10, 20, 30, 40, 50, can you have too many clamps...I don't think so...in each of the various sizes also ........

Classic Finn................that's like asking "how much horsepower do I need in a race car". When it comes to clamps, someone working with wood can never have enough. I've got a couple of thousand dollars invested in clamps and don't have 25% of what I need. I'm always needing a new or another clamp. Finally broke down a couple of months ago and made a couple of dozen clamps for a job I was doing...................and should have just made 5 or 6 dozen more while I was at it. How many clamps does it take to build a teardrop trailer? I've not built one yet, but I'd say it's going to take most everything I've got. Take a look at some of the build pictures some of these fellows have, and you'll see a lot of clamps in use from time to time.

Dear Heiiki,

Take a look at some of the clamping solutions Steve Frederick uses. You may be able to save a lot of money depending on if his solutions work for your build.

Since I plan on going larger than 4' I picked up some 72" bar clamps on sale for $15.99 each...

I also have a large assortment of the cheapie plastic spring clamps in various sizes

Agree you can never have too many, I buy them as I need them.

It is a good idea to buy them in pairs or quads all the same, a single clamp is strangely less useful then a pair exactly the same.

Also you'll need a good variety, if you think you might need a clamp go ahead and buy it. Your practically garanteed to use it a few times in the future.

If you are looking at pipe clamps the Pony brand are quite a bit better than the chinese copies.

Mitheral is right................always buy two or four of the same length.

hey all,
jmho, man can never have 2 many clamps,pocketknives,flaslites
but i got by with 6 so far

Yupper!

I reckon your right on the amounts - never have enough...
I went out and bought 20 pieces for now.... And as I was looking at the
profile...

I told my better half that - Honey we be needin more...You should of seen
the look on her face.....


But you should see her tools for her Jewelry Making... Ohhh brother...
there are thousands of dollars there...

I,ll run and get some more ... I need to get some long sized ones as well..



Classic Finn

i have 0

but tear is tear shape and on wheels



i kind a holding low budget and if i finish then i say how $$$ it was
when i started then budget was ~770 us $. and i havnt spent it yet


Meelis