Ideas on how to replicate the Intech Flyer Discover Tip-out
Posted: Tue Jul 18, 2023 9:11 pm
I have a cargo trailer I'm wanting to convert into a camper, the problem is, I still use the cargo trailer for actually hauling non-camper stuff! But, I just recently ran across this camper from Intech and absolutely want to try and replicate what they are doing. I would be a perfect compromise. The tent part seems straightforward enough; although its going to mean some custom tent making (I'm assuming). But the more interesting problem is the actual "tip out" and how to support it. Obviously I'll need to weld in some supports for this area. But I'm not sure how to go about replicating the actual mechanism. Any ideas? I really love this idea and hope I can figure something out. Here's a link to the trailer so you can see what I mean by "tip-out".
https://intech.com/rv/models/flyer/discover/
Thanks for any thoughts and insight into how to re-create this.
https://intech.com/rv/models/flyer/discover/
Thanks for any thoughts and insight into how to re-create this.