Teardrops n Tiny Travel Trailers

I read about someone building a slide on tear.I have a snowbear 7000 utility trailer that I could use as a slide in.Since the whole thing will be sliding on and off the utility trailer what would be a good way to build the floor so it will be light and strong enough to keep the whole unit from twisting when moving on and off.I was thinking 1/2" MDO ply for the walls and 1/8" inside and out for the top.I'am trying to be as light as possible as the trailer weighs 348 lbs empty and will be pulling with a 4 cyl auto.

You might looking at the bottom of this thread.

http://tnttt.com/viewto ... ty+trailer

and for lite Tear a versions of these maybe usable.
http://tnttt.com/viewtopic.php?t=7275

and
http://tnttt.com/viewtopic.php?t=7565


I hope this helps.
And as Madjack said pictures - pictures - pictures.


Pat

Thanks Pat.I should be able to come up with something after reading that info.

If you're snowbear trailer is like mine, it has removable gates. You might use stakes built into the teardrop and reuse the gate holders. If you used a wedge system you could really tie the slide-off down.