Page 1 of 1

Williams Composite Materials

PostPosted: Thu Apr 13, 2006 5:35 am
by MeelisV
i found this site

http://www.williamscomposite.com/index1.html

what are your opinions about it.

:roll:

PostPosted: Thu Apr 13, 2006 5:43 am
by Sonetpro
That looks like it would be the best availiable so far for building an ultralight. I like it.

PostPosted: Thu Apr 13, 2006 7:20 am
by madjack
...looks to be a hck of a product for walls...from whatI could tell it may have to be kerfed to go around a radius...pretty good stuff if the price isn't out the roof........
madjack 8)

Re: Williams Composite Materials

PostPosted: Thu Apr 13, 2006 10:05 am
by angib
Pedaal wrote:what are your opinions about it.

It looks like good stuff - its strength figures seem good, particularly the peel strength, which is usually the weak point of sandwich panels.

You still get the same problems as any ready-made sandwich structure:
- difficult/impossible to bend;
- requires a lot of work to join at corners;
- requires inserts to fix things to it in the middle of a panel.

Andrew