Teardrops n Tiny Travel Trailers

by **sHoootR** » Wed Jun 28, 2006 12:20 pm

Almost time for the dreaded HATCH
Got on roof skin......
http://tnttt.com/album_ ... ic_id=9960

http://tnttt.com/album_ ... ic_id=9958

http://tnttt.com/album_ ... ic_id=9959

by **Chris C** » Wed Jun 28, 2006 12:24 pm

Looks really sharp, Shooter. (sharpshooter?) :thinking:

Keep it up. :thumbsup:

by **Miriam C.** » Wed Jun 28, 2006 12:31 pm

Just keep it up and you will be completely done in time for Bernice.

Or sooner!!!

Looking great
Aunti M

by **JasonTX** » Wed Jun 28, 2006 1:39 pm

It looks nice. I'm just slightly ahead of you on my build. (pics in album) My hatch is already built and installed. I had built the frame of my hatch earlier. I skinned it this past weekend and I was skeptical at first on what I have read on here that the hatch isn't that bad at all, and I am a believer now. That hatch was the easiest part that I have had up to this point.

by **Ira** » Wed Jun 28, 2006 1:52 pm

VERY nice!!!

WHAT MATERIAL ARE THOSE SIDE SKINS AGAIN!? THEY LOOK GREAT!

by **Guy** » Wed Jun 28, 2006 6:45 pm

Dear Shooter,

Looking real sharp and happy you did not shoot yourself too many times.

by **jagular7** » Wed Jun 28, 2006 11:37 pm

Yes, very nice. Hopefully you are keeping an album progress together. I do recall that there was a time where there was sealant going on the bottom of the camper, some clean clothes and hands, but a smigin of sealant on the leg.... This has turned quite a bit around, don't you think?

by **bledsoe3** » Thu Jun 29, 2006 1:52 am

Who sHoootR, I really like this view.

Kinda reminds me of mine.

by **bronco** » Fri Jun 30, 2006 11:13 pm

that looks good shootr! i laughed at your 1000 staples later comment because i bought on of those cheap a$$ home depot electric staple guns for my headliner yesterday and i spent forever trying to tap them flush with a hammer and screwdriver but i had already put my glue on some of the spars and was comitted. oh well! youve done a nice job on yours.

by **oklahomajewel** » Sat Jul 01, 2006 9:24 am

COOL BEANS!!!!!!!!! I hope mine looks a little like that by the end of this week! :lol:

Keep it going - show it to all of us at Grand Lake this Sept !!! Julie

by **Laredo** » Sat Jul 01, 2006 10:54 am

<hijack>
OKJewel, is that Sept gathering at Grand Lake of the Cherokees? Could you post dates?
</hijack>

Nice work, shootr! i like your technique.
As someone asked, could you repeat the description of the material you used for your sides?

by **Darren** » Sat Jul 01, 2006 12:22 pm

Laredo wrote:<hijack>
OKJewel, is that Sept gathering at Grand Lake of the Cherokees? Could you post dates?
</hijack>

I'm hoping to make the meet. Here's the info.

http://tnttt.com/viewtopic.php?t=9014

by **sHoootR** » Sat Jul 01, 2006 3:21 pm

They are replacement door skins 36x80 approx.1/8" thick.I set them at about a 30 deg. angle. Got them at home depot, about $7.00 each. Just have to find a nice grain you like by sorting through the stack........

by **Witch** » Wed Jul 05, 2006 11:49 pm

Hey JasonTX.

I was looking at your avatar and it looks familiar. Is that a Brantly B2B?

Later.

Teardrops n Tiny Travel Trailers

1000 Staples Later

1000 Staples Later

Looking sharp!

Jason

Who is online