Thank you guy's, it's been a real noddle twister to get it too look correct with a "stock" Harbor Freight trailer, small wheels and high deck height. The wife called it the Yertle Turtle.
Ok, here are a few of the details.
Haul Master model 94564 deck shortened 2" center of axle @ 62.5" from front of deck (stock location @ 64.5)
Body 96" long, 52" tall, 67.75' wide.
Center wind jack!
I have also drawn plans for a version with fenders of simple tube/angle frame, Torsion Axle Bolt-On Stub Spindle, A-Frame Trailer Coupler, Top Wind Jack, 205/60R15 wheel/tire combo. Body 96" long, 48" tall, 60" wide, just so the sides can be made from standard sized plywood. Oh, and 1" radius on all inside corners. Inside height of only about 38"but it makes up for it in width and keeps the profile better.
This is most likely the trailer I'll build for myself after I finish the Sidewinder later this year.
A little preview below.
Mike, I do not have anything in ACIS. I am working in VCarve Pro mainly(EPS, DXF, AI) and Adobe PhotoDeluxe, Photoshop 7, and MS/Paint sometimes. EPS and DXF transfer well over the net and I'll be happy to send you what I have and make adjustments or corrections where needed.